Archive for November, 2008

Skateboards are what most people think of when they hear the term skateboarding equipment. Well, some people might think of skateboard pads, but mostly I think it is a skateboard people think of. To be exact, what people think of is complete skateboards.

complete skateboards consist of 3 main parts. The skateboard deck, the trucks, and the wheels. I think everybody knows that the skateboard deck is the part that you stand on. The truck is the medal part your wheels hook on to. Its important to get the type that best fits your style of skateboarding. The last part of a complete skateboard is the wheels. I am pretty sure everybody knows what the wheels are. You can pick different types of decks, trucks, and wheels depending on what type of skating you will be doing.

After cool graphics, the main dimension of a skateboard deck is its width. You have to make sure your skateboard looks cool. If you like to skate in half pipes or pools or at a skate park your deck should be about 8.25" to about 8.5" wide. The wider the deck the more stable it is. For technical and street riding you would need about a 7.5" to 8"wide decks. This well help you do flip tricks, grinds, and other stuff like that a bit easier.

The next part of a complete skateboard is the trucks which come in three different heights. Low, medium, and high. Low trucks give you more stability and quicker flip tricks. They also go well with smaller wheels. Higher trucks allow you to use bigger wheels for a little bit more speed, you can roll a little farther to, and more bigger wheels make it easier to go over rougher roads. Medium trucks are between low trucks and high trucks. Most skaters choose low trucks for street skating. You can also specialize the bushings that are between the deck and the trucks. Soft rubber bushings are better for sharper turns while harder rubber is more stable and harder to turn. Most skaters just use a medium hardness.

Wheels are the last part of a complete skateboard that you need to select. As with all parts of your skateboard, appearance is a big factor. You need to make sure your wheels look good with the rest of the skateboard. The other 2 factors are the hardness of the wheel and the diameter of the wheel. Larger wheels allow you to go faster. If you are doing a lot of skateboarding on ramps, you will want a larger wheel to get more speed so you can get more air. If you are going to be doing more tricks on the ground, you will probably want smaller wheels because they will be lighter and allow you to flip your skateboard easier. If you are going to do a lot of all terrain type skating, you may want to choose a softer wheel to give you a smoother ride. As with all of the elements of a complete skateboard, many skaters will be well served by getting a medium sized wheel of average hardness.

Now that we have gone over all the individual elements of a complete skateboard, you will be happy to know, most of the time you can just buy boards already put together with middle of the road equipment and be off and skating without ever having to choose the components. This is recommended for new skaters. After you start skating you can go out and replace components to fit the style of skating you do the most of. Once you are advanced and building your dream board, you will know exactly what you want and it won’t be hard to pick out all the components.

When you are ready to buy your extreme sports gear check out one of many resources on the internet like www.SkateboardPlanet.net where you can save a bunch of money on big name complete skateboards and other equipment.

Fundamentally, a golf club is compiled of three prominent golf club components. Each golf club component is incessantly improved as time passes through modern science and has produced a range of variety to pick from. That’s why the game of golf currently is somewhat different than it was last ten years.

The Head

The piece of the golf club components that have contact with the ball is the head. This golf club component has two basic types. The first is wood head that comes in a big piece with an angled front and a part of mass behind that exterior. It can create energy to let the ball to sail far. The other is iron head and this also has an angled surface with notably fewer mass behind it.

The surface that makes contact with with the ball is named the striking area and in the middle of that is typically named the "sweet spot." The more angles that the striking area has the higher the ball will go. Usually, woods are designed for low route distance and the irons are intended for high route shots that let for control and accurateness.

The Shaft

There are two types of the golf club component identified as the shaft. The metallic looking shaft is referred to as a metal shaft while the black looking one is a graphite shaft. Commonly the metal shaft is very solid and some players assume this allows them more control over their swing.

The graphite shaft moves more through the swing and this can give some golfers more distance on their shots and some also believe it gives more accuracy. There are customarily more metal shafts than graphite shafts out there but as the technology of the graphite shaft continues to advance it threatens to be the golf club component that replaces the metal shaft for good.

The Grip

The grip is placed at the top of the shaft on which the golfers hold on to do the swing. Generally, this golf club component is made of a tacky material like rubber. Grip is the only one of golf club components that had not changed for years. However, there have been new kinds that are released currently.

Thicker grip is one that is very well-liked among golfers. This is because they tend to be softer feeling as well as easier for the golfer to grasp although they are made of rubber. Meanwhile, using old grip is not recommended as they can be slippery and cause the club to escape from your hand while swing it. Nonetheless, the new sort of this golf club component can reduce that problem.

Explore more about golf club components, since there are many things you haven’t known and will be answered only if you visit the links here! These guidelines will make you smarter about golf club!

The soccer kit is not just the uniform that a soccer team wears when playing. It means so much more and has evolved from its humble beginning in much the same way as the soccer boot. Beginning life as a simple top to help distinguish one team 's players from the other team, the soccer shirt has become a piece of design and innovation and more importantly to soccer fans across the globe - a fashion accessory.

When soccer became an organised sport in the mid 1800s, the formation of the English Football Association brought many rules to the previously anarchic sport. However, uniforms or kits were not one of the early rules as players generally wore whatever they liked with a coloured cap or scarf used to distinguish themselves from other players. Soccer in England was played mainly by wealthy gentlemen who were financially able to purchase a suitable shirt in their club 's colours - with plain white t-shirts the most popular kit due to its ease to obtain and being relatively cheap.

In a handbook published in 1867, it was advised that 'if it can be previously so arranged, to have one side with striped jerseys of one colour, say red, and the other with another, say blue. This prevents confusion and wild attempts to wrest the ball from your neighbour.' However, from the inception of the Football Association in 1863, it still took over a decade for soccer kits to appear and become a regular part of the game.

The first kits that appeared were generally taken from public schools, with teams such as Blackburn Rovers adopting the colours initially of Cambridge University as many of their players were former students. Many of the original kits were garish and brash, shown by Reading 's use of a salmon pink, claret and blue uniform - a million miles from the simple royal blue and white of today.

As the sport moved away from a middle class hobby and became popular as a working class occupation, the kits were to evolve with the sport itself. Individuals would no longer be responsible for providing their own uniform, as clubs began to adopt specific colours and provide the kit for their team to wear.

Association football became increasingly popular with spectators and so the soccer players' attire was to be affected to improve the ease of viewing. This led to the abandonment of bright, gaudy colours in favour of distinctive primary uniforms to enable viewers to easily identify their team from a distance.

As the game evolved, the equipment used also changed, with the invention of shin pads by Sam Weller Widdowson in 1874. His use of cut down cricket pads outside of his stockings would also evolve into smaller pads worn inside the socks, a more familiar concept to the modern-day soccer player.

Shorts and socks were not considered a part of the team 's kit until around the turn of the century. In 1901, new regulations were introduced making socks officially part of the strip as well as so-called 'knickers' not being required to be lower than the knee leading to the 's occer shorts' that we see today. It was in the first twenty years of the 20th Century that the soccer kit of today really began to take shape. Article by Arsenal News

Forty years on from the first soccer kits, and with association football becomingly increasingly popular in the UK, soccer kit styles became more fashionable and design-conscious in the early 1900s. Popular shirt designs included the eternal favourite of vertical stripes, although the pinstripe of the 1800s was replaced with a wider stripe. The First World War prevented the UK soccer league from continuing from 1914 until the competition returned in 1919.

Between 1919 and the next suspension of professional soccer in 1939 with the outbreak of war with Germany, kit innovation had slowed down and the most notable change of the period occurred in the 1930s. Collars replaced crew necks and shorts were no longer plain with the inclusion of stripes down the side of the leg. The most influential change was shown by north London 's Arsenal when their kit had red shirts with contrasting white sleeves, a design that is still their home kit to this day.

Another introduction that appeared in this period was the introduction of shirt numbers, experimented with by Arsenal before becoming more common in 1939 before the Second World War. Numbers would go on to play a significant role in the merchandise sales of shirts in the latter part of the 20th century, but were used initially to allow easier identification of players.

After the end of World War II, rationing would play a major part in the development of soccer kits. Clubs would struggle to replace old kits due to clothing rations and so would play in the same kits for years or borrow full strips from other teams, including rugby clubs. KIts began to keep a level of consistency and teams opted to maintain a specific colour uniform which would become associated with their club.

The baggy, loose-fitting shorts of the early parts of the century were gradually replaced during the 1950s when kits became more streamlined to aid speed and agility of players. This change in style and design coincided with the European influence on the previously English-dominated sport as soccer started to evolve into a worldwide phenomenon.

The 1950s saw the introduction of the European Cup, renamed as the UEFA Champions League, won for the first five years by Spain 's all-white Real Madrid. As the game became publicised through the popularity of both club and country competitions, television also introduced soccer to a wider audience across the world. The sport gained followers from many countries and backgrounds and so the players' attire and the players themselves took on the role of soccer icons.

The arrival of the swinging 60s brought a new type of soccer player to the public 's attention as the sport 's popularity reached unprecedented highs. The club game was full of well-supported teams including the red of Liverpool and the black and blue stripes of Italy 's Internazionale. Alongside the club game, the FIFA World Cup brought a whole new level of interest with the global superstars of the Brazil squad including such greats as Pele and Garrincha.

The popularity of the sport, combined with the new levels of skill demonstrated by some of the new stars of soccer ensured that team kits would need to be as eye-catching and iconic as the players. With television coverage increasing, soccer teams would have to improve the quality of their kits as a symbol of the success and skill that the team possessed. Clubs would begin to realise the potential of a commercially appealing soccer kit in the future, and this belief began to take shape as the 1960s rolled on. Article by Arsenal News

The 1960s saw the arrival of football superstars like George Best, raising the profile of the game to encompass more than just fans of the sport. Often referred to as the 'fifth Beatle', Best would be symbollic of the new appeal that the modern 60s soccer player had in society. Best 's fanbase extended past the Manchester United fanbase, in the same way that David Beckham 's celebrity status would engulf the world thirty years later.

With the new soccer celebrity, clubs would realise the commercial potential of their assets and would develop their kits and sales techniques to achieve maximum financial benefits. It wasn't until 1975 that the first official shirts went on sale in England when Leeds United launched the first ever replica kit. The shirts were made by Admiral and featured a club badge, consequently raising the price for supporters wishing to wear their team 's colours. Previously able to buy a generic white shirt, Leeds fans would now have to spend more than twice as much money on the official replica shirt.

The arrival of the replica kit would have the biggest impact imaginable on the evolution soccer kit. Club badges would become a marketable aspect of the kit, with clubs seeking to register the copyright to protect their investment. Kit makers such as Admiral, Bukta and Umbro would waive their fees for producing the kit in return for a cut of the profits generated by shirt sales, a commercial practice that continues to this day.

Another practice that would enter the soccer kit design would be the introduction of shirt sponsors in the late 1970s. Initially, clubs would show the name of the kit manufacturers, as demonstrated by the first UK club sponsor of Hibernian FC with shirts showing Bukta on the chest. This quickly evolved into a marketing strategy for both club and sponsor, with the soccer team earning substantial financial rewards for advertising the sponsor 's name.

Kit sponsorship remained conservative in the UK, with teams only allowed to display one sponsor up until the 21st century when restrictions were stretched. Clubs would print sponsors on their shorts as well as on the backs of shirts - although this had been common practice in countries such as Mexico for years. Mexican club sides would display three or four sponsors on their shirts, often with two or three individual company names solely on the shirt 's front.

The 1980s saw a trend for slim-fitting shirts and smaller shorts, epitomised by the all red Liverpool kit worn by such Kop legends as Dalglish, Rush and Hansen. These kits gave way to the baggy, retro look of the 90s that was introduced when the Premier League was launched in 1992. Bold colours and unusual patterns were often chosen, sometimes as a second or third kit with a traditional design as the club 's main uniform.

Squad numbers were used by Premier League clubs in another attempt to boost revenue from shirt sales, as popular player 's names were blazened across the backs of supporters in the stands. With so many kits available for each club, shirt sales became a major part of the soccer club
's economy and so regular changes occur to boost club funds and profits. It is not unusual for a club to release two or three different shirt designs each year in an attempt to capitalise on the soccer shirt 's commercial draw.

So what does the future hold for the soccer shirt? With skin-tight lycra, baggy-retro look, sleeveless shirts and animal prints all making an appearance in the last 150 years, the possibilities are endless. As new fabrics, designs and styles become popular, the soccer shirt of the future holds so many possibilities. Article by Arsenal News

Golf News November 12th, 2008

One win puts Love at 20 and into Hall of Fame light

So much for that notion the Fall Series on the PGA Tour is meaningless.

On the surface, Davis Love III winning at Disney might have looked that way.

He scrambled for pars on the last two holes to hold off a rookie (Tommy Gainey) who was 228th on the money list, wears two gloves and looks like he's trying to kill a snake every time he swings. When it was over, Love posed with a bronze trophy of Mickey Mouse playing golf (just think of the white elephant gift nobody will take off your hands).

But that one victory was enough to change the perception of Love.

Timing is everything.

He won the final event of a season in which Love struggled to return from a devastating ankle injury last October that kept him out of golf for four months, out of the Masters and off another Ryder Cup team. And his victory came one day before the induction ceremony for the World Golf Hall of Fame.

Read More?

Golf Lessons

PGA chips in more cash

The PGA Tour released its schedule for the 2009 regular season yesterday, with 25 tournaments featuring purses of at least $6 million US and a newly configured "Texas swing" of three events in the spring.

Still to be determined are details on a revamped FedEx Cup, and whether to take a week off before the Tour Championship.

Once that it is decided, the Tour said it would release the rest of its Fall Series schedule.

By announcing the majority of the schedule, the Tour put to rest speculation that some tournaments might be in jeopardy because of the economy. The title sponsors are under contract at least through 2010, and most of them have slight increases in prize money built into their agreements.

Among those that kept prize money the same were the FBR Open and Travelers Championship, both at $6 million.

Read More?

Golf Lesson Tips

Garcia Wins The Vardon Trophy

With the PGA Tour season officially over, it's now official: Sergio Garcia has won the Vardon Trophy, the first European-born winner since 1937 to have the lowest adjusted scoring average.

Garcia played 72 rounds with an adjusted average of 69.12, overtaking Phil Mickelson (69.17) at the Tour Championship. Anthony Kim finished third at 69.28.

The last European-born winner was Harry "Lighthorse" Cooper in 1937, the first year of the award when it was based on points. Tiger Woods was not eligible because it requires 60 rounds, and Woods only played 25 before he was injured.

Padraig Harrington wrapped up the points-based PGA player of the year award after winning the PGA Championship, which came with a 50-point bonus for winning two majors in one year. Harrington, who also won the British Open, finished with 116 points to finish ahead of Woods, who had 78 points in six events.

An architect among 6 inducted to golf Hall of Fame

Pete Dye, who designed more than 120 courses with risk-and-reward options that brought pleasure to some and frustration to most, was among six people inducted Monday night into the World Golf Hall of Fame.

The 2008 class featured an amateur, an architect and an author, along with three major champions.

Craig Wood was the only player elected through the PGA Tour ballot. Wood, the first player to win the Masters and U.S. Open in the same year and the first to lose all four majors in extra holes, received the minimum 65 percent of the vote.

Three-time major champion Denny Shute and Bob Charles, the first left-hander to win a major, got in through the Veteran's category.

Read More?

Golf Instructions

If you practice a shot enough you will virtually do it on autopilot when you get to the course, but you must also remember that variety will make you a better all round golfer.

The more techniques that you can master the better you will be on competition day.
You can do this by trying new techniques when you practice.
Observe the results you get when you use different clubs or try different techniques.
Try adding some spin to the ball and see how this affects the flight.
Use different types of golf balls to see whether your level of expertise has changed and allowed you to get more benefit from the different ball compressions.

Even consider testing new golf clubs.
As your game progresses, so will your need to change equipment accordingly.
You won't want to be using the same clubs you had when you started playing and you will probably not want to be using the same golf balls either.

Better equipment will allow you to make shots that weren't possible before, and practice will help get you to the next level where you can take advantage of this equipment.

Visit Golf Pointers for more information and some pointers on how to get the most out of your game.

Today, a lot of fraud still remains in the sports memorabilia industry -- especially on eBay. Legitimate vendors have tried to curb this for a long time but it is a tough battle. Baseball collectibles remain one of the most popular Google searches, followed by football memorabilia. However autographed sports memorabilia still is a viable online business.

The way one collects autographed memorabilia is similar to the purchase of shares from the stock exchange. The celebrity is the stock. You have to make sure the celebrity has good fundamentals, management, and you also have to investigate how the market values them.

Is eBay a good place to buy autographed memorabilia? It definitely is but you just have to make sure you are purchasing from a reliable seller and that you are getting certified items. We would be happy to look at items you are considering buying, just email us with a link to the item and we will give you our opinion.

eBay is a prime place to sell fake autographs because they are easy to pass off as authentic.Typically, the fake seller provides an copy of the autograph and a description. To the new buyer, the signature looks authentic.

You need to shop around for several reputable sellers who offer certified signed memorabilia and other high quality autographed sports items. Buy with the dealers you trust. Beware of the grifters online - dealers that cannot show proof of authenticity on high-dollar items. Also, beware of those who might try to pass off sports memorabilia with unauthentic signatures. If you have a bad feeling about a product or dealer ,don't take the chance.

Sport jerseys, Gloves, game tickets, batting gloves and some other sports item are assumed to be of great interest for autographed sports memorabilia collectors.Collectors will have a wide range of interest when it comes to collecting autographed sports memorabilia, but they do need to be extremely careful when purchasing items to make sure that the item is authentic. At times, collectors will have entire rooms in their homes dedicated to their collection of sports memorabilia, which might tend to drive their spouse crazy at times. Images of players of every sport|game are created, which can tell a story about a certain moment in history of the sport.

One great benefit associated with an autographed sports memorabilia item is that their monetary value may go up with time.A Joe Montana NFL framed jersey sells for more than double what it used to sell for 5 years ago. Unfortunately, when a player passes away, their memorabilia goes up even more.

As a coach it is our responsibility to teach sports safety. Many experts say it is the number one responsibility of any good coach or parent. Children need to learn to practice good safety in every sport. The great sport of baseball is no different. Baseball and softball is among the most popular sport in the United States. In the United States there are over 6 million kids from the ages under 14 playing organized baseball and softball. There are three times that playing the game recreationally. Last year there were over 150,000 players treated in hospital emergency rooms for baseball and softball related injuries.

Baseball pitching machines are very safe products to use. The key is to use them properly. I have been to many of practices and watch untrained coaches and players use equipment and get hurt. Here are 5 key tips to reduce of chance of injury when using a pitching machine.

1. Make sure that an adult is always presentwhile at the batting cages. As adults we are good role models for our players. We as adults are supposed to be more mature and smarter. We can all remember what it was like to be young. When we were kids we thought we were invincible. Coaches and parents look for hidden dangers. If you see something, point it out to the player. It is always better to be prepared.

2. Batting helmets are a must. Batting helmets Proper fit is a key to safety. Chin straps are good to keep the helmet in place. Face guards have shown to prevent facial injuries.

3. Dry baseballs are also a key for a pitching machine. Balls will absorb moisture from many sources and become dangerous. Wild pitches are soon to follow. Make sure that the pitching machine and baseballs are dry before use. A great idea is to use pitching machine baseballs. They are designed not to retain water. The pitching machine baseballs will give a batter a great pitch every time.

4. Make sure a player uses common sense. Keep a player focused. Teach the player on what to do if there is a wild pitch. Teach them proper technique on how to get out of the way of a wild pitch.

5. Have a plan. Make sure you know what to do if an injury occurs. Have a properly stocked first aid kit and always have a cell phone close by in case of an emergency.

I have been to a pregame and witness this happen. I was watching an away game and a young palyer was getting loose in a batting cage, not paying attention and he got hit in the side of the head. I know that it could have been prevented if only proper precautions would have been taken. No matter what the age of the athlete is, stay out of the hospital emergency room and stay on the diamond. Safety is the best game to play.

What actually constitutes a real sports fan? Does owning NBA merchandise from a favorite team convert a person into a bigger sports fan than an individual who does not? Some may claim that a team jersey is the fundamental team merchandise a fan should acquire as a sign of loyalty to a team. Quite a number so called fans will go on a shopping spree for affordable sports memorabilia just as soon as their team wins a pennant. But when the team is going through a rut, they can hardly be found with paraphernalia related to the team they support.

Some of the quicker selling jerseys of more famous or better performing teams are sold at a higher price. This would mean that there would be quite a few true fans out there who would not be able to purchase such items. The same situation persists for season tickets.

Why would we support teams or have favorite players to begin with? Individuals primarily the male of the species have a thing about games and being a member of a team. This behavior stems from our childhood. Some things just do not change. We still adore the Michael Jordans of current times because they afford us to live vicariously through them. Not just anyone can throw a three pointer or hit a home run at will but anyone can own an NBA sports team jersey. And it is not just the games that attracts us but the lifestyle as well.

Knowledge is an integral part of being a real fan. Information of team history, current team events and the overall sport is essential. Many fans who attend weekend games are simply doing it for the atmosphere as it is the only time they have a chance to wear their NFL replica jerseys or parade their other team logo merchandise. There is certainly nothing wrong with that as the experience is unbelievable. Having said that, attending games alone does not qualify a person as a genuine fan according to some.

Loyalty is another very vital virtue of being a true fan. As stated earlier, some fans are fickle and only show support to a team during the better times. These are known as fair-weather fans. The minute a team declines in performance, these followers jump to the next best team or the new leader of the pack.

There are quite a few supporters all over the country who are known as armchair fans and have never been to a game. There are people who love a game in spite of not ever having played it. This could be because of a persons physical or psychological restriction. It is difficult to determine what attracts us to a game we do not even play. Could it be the camaraderie? Could it be euphoria of attending a major final? Or could it be the fact that we are merely able to appreciate a good thing when we see it.

 Page 1 of 2  1  2 »